((View More))
Pioneer GM-A3702
2-Channel Class B Bridgeable Amplifier 500 Watts Max
Product highlights:
- 500 Watts Max Power
- Automatic signal sensing and Turn-ON
- Hi-Volt input level control
- Balanced isolator input circuit
((View More))
Boss BE1500.1
Elite Series 1125W x 1 @2Ohms, 1500W Max Power Class A/B Monoblock Amplifier
Product highlights:
•Monoblock
•Full-Range, Class A/B
•2Ω Stable
•RCA & Speaker Level Inputs
•Low Pass Filter
•Bass Boost
•Remote Subwoofer Control
•LED Illuminated End Panels
•Thermal, Short and Overload Protection CircuitsFull-Range, Class A/B
•2Ω Stable
((View More))
DB Drive WDX100.4
Mini 4-Channel Class-D Audio Amplifier 400 RMS
Product highlights:
- Class “D” Circuitry
- Direct Connect Speaker Terminals
- 4 Gauge Power Wire Input
- CHM- Collective Heat Management
- ACT – Adaptive Crossover Technology
- SESI – Signal Evaluation Status Indicator
- APC – Audio Protection Circuit
((View More))
Alpine KTA-200M
200W RMS Power Pack Series Class D Monoblock Amplifier
Product highlights:
- compact mono subwoofer amplifier
- 200 watts RMS x 1 at 4 ohms or 2 ohms
- CTA-2006 compliant
- Dynamic Peak Power (DPP) technology adds a burst of power when needed
- selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
- preamp inputs only
- PowerStack bracket included for mounting amp behind an Alpine iLX-W650 (item #500ILXW650) or iLX-407 (#500ILX407) digital multimedia receiver
- wiring, hardware, and fuse not included with amplifier
- 12-gauge power and ground leads and a 20A fuse recommended
- dimensions: 7-3/4″W (with wiring) x 1-3/8″H x 3-9/16″D
((View More))
Alpine KTA-450
400W Peak (200W RMS) Power Pack Series 4-Channel Amplifier
Product highlights:
- 4-channel car amplifier
- 50 watts RMS x 4 at 4 ohms (45 watts RMS x 4 at 2 ohms)
- 100 watts RMS x 2 bridged at 4 ohms
- CTA-2006 compliant
- Dynamic Peak Power (DPP) technology adds a burst of power when needed
- selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
- preamp and speaker-level inputs
- selectable 2- or 4-channel input
- PowerStack bracket included for mounting amp behind Alpine iLX-W650 (#500ILXW650) or iLX-407 (#500ILX407) digital multimedia receiver
- wiring, hardware, and fuse not included with amplifier
- 12-gauge power and ground leads and a 20A fuse recommended
((View More))
Alpine S2-A36F
S-Series Class D 4-Channel Amplifier 360 Watts RMS
Product highlights:
• 60 watts x 4 channel @ 4 ohms
• 90 watts x 4 channel @ 2 ohms
• Bridged: 180 watts x 2 channel @ 4 ohms
• Total RMS Power: 360 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
((View More))
Alpine S2-A60M
S-Series Class-D Monoblock Car Amplifier 600 Watts RMS
Product highlights:
• 330 watts x 1 channel @ 4 ohms
• 600 watts x 1 channel @ 2 ohms
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
Pioneer GM-DX871
Monoblock Class D Amplifier 800 Watts RMS
Product highlights:
- 1,600 Watts Max Power
- High Quality Textured Aluminum Panel and Tough Frame
- Gold-plated RCA Terminals
- HQ Sound Parts
- Bass Boost Remote included
((View More))
Pioneer GM-DX874
4-Channel Class D Amplifier 600 Watts RMS
Product highlights:
- 1,200 Watts Max Power
- High Quality Textured Aluminum Panel and Tough Frame
- Gold-plated RCA Terminals
- Hi-Res Audio Capable
- Bass Boost Remote included
((View More))
JL Audio JD400/4
4 Channel Class D Full-Range Amplifier 400 Watts RMS
Product highlights:
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
((View More))
JL Audio JD500/1
Monoblock Class D Subwoofer Amplifier 500 Watts RMS
Product highlights:
• 250 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
DB Drive WDX1500.1
Monoblock Class-D Audio Amplifier 1500 Watts RMS
Product highlights:
- Class “D” Circuitry
- Direct Connect Speaker Terminals
- 4 Gauge Power Wire Input
- CHM- Collective Heat Management
- ACT – Adaptive Crossover Technology
- SESI – Signal Evaluation Status Indicator
- APC – Audio Protection Circuit
- Included Remote Level Control
((View More))
Kicker 46CXA800.1T
CX Series mono subwoofer amplifier — 800 watts RMS x 1 at 1 ohm
Product highlights:
- mono subwoofer amplifier
- 300 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
- 800 watts RMS x 1 at 1 ohm
- CTA-2006 compliant
- Class D amp technology
- frequency response: 25-200 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- fixed subsonic filter (25 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
((View More))
JL Audio M600/6
M Series 6-channel marine amplifier — 75 watts RMS x 6
Product highlights:
- 6-channel marine amplifier
- 75 watts RMS x 6 at 4 ohms (100 watts RMS x 6 at 2 ohms)
- 200 watts RMS x 3 in bridged mode (4-ohm stable in bridged mode)
- Class-D design
- white and gray powder-coat finishes, gasketed control cover, and stainless steel hardware
- variable high- and low-pass filters (50-500 Hz, 12 dB per octave)
- optional remote level control
- 4-gauge power/ground leads and 50-amp fuse recommended — wiring and hardware not included with amplifier
- 10-1/4″W x 2-1/16″H x 7-1/8″D
((View More))
Pioneer GM-DX971
Monoblock Class-D Amplifier 1200 Watt RMS
Product highlights:
- 2,400 Watts Max Power
- High Quality Textured Aluminum Panel and Tough Frame
- Gold-plated RCA Terminals
- HQ Sound Parts
- Bass Boost Remote Included
((View More))
JL Audio RD500/1
RD Series Class-D Monoblock Car Amplifier 500 Watts RMS
Product highlights:
• 250 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
JL Audio JD1000/1
JD Series Monoblock Class D Subwoofer Amplifier 1000 Watts RMS
Product highlights:
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
JL Audio M400/4
M Series Class-D 4-Channel Marine Amplifier 75 watts RMS x 4
Product highlights:
- 4-channel marine amplifier
- 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
- Class-D design
- white and gray powder-coat finishes, gasketed control cover, and stainless steel hardware
- variable high- and low-pass filters (50-500 Hz, 12 dB per octave)
- optional remote level control
- preamp-level inputs
- preamp outputs
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 8-1/2″W x 2-1/16″H x 7-1/8″D
((View More))
JL Audio M700/5
- 5-channel marine amplifier
- 75 watts RMS x 4 at 4 ohms + 180 watts RMS at 4 ohms
- 100 watts RMS x 4 at 2 ohms + 300 watts RMS x 1 at 2 ohms
- 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- Class-D design
- white and gray powder-coat finishes, gasketed control cover, and stainless steel hardware
- variable high-pass filter on front channels (50-5000 Hz, 12 dB per octave)
- variable high- or bandpass filters on rear channel (50-500 Hz, 12 dB per octave)
- low-pass filter on subwoofer channel (50-500 Hz, 12 or 24 dB per octave)
- optional remote level control
- preamp-level inputs
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 10-1/4″W x 2-1/16″H x 7-1/8″D
((View More))
Kicker 46CXA1200.1T
CX Series mono subwoofer amplifier — 1,200 watts RMS x 1 at 2 ohms
Product highlights:
- mono subwoofer amplifier
- 600 watts RMS x 1 at 4 ohms
- 1200 watts RMS x 1 at 2 ohms
- 1200 watts RMS +/-10% x 1 at 1 ohm
- CTA-2006 compliant
- Class D amp technology
- frequency response: 25-200 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- fixed subsonic filter (25 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
((View More))
Alpine R2-A60F
R2-Series 4-channel car amplifier — 100 watts RMS x 4
Product highlights:
- 4-channel car amplifier
- 100 watts RMS x 4 at 4 ohms
- 150 watts RMS x 4 at 2 ohms
- 300 watts RMS x 2 bridged at 4 ohms
- CTA-2006 compliant
- Class-D amplifier design
- frequency response: (+0/-3 dB) 15 to 45,000 Hz (Hi-Res capable)
- variable high-pass, low-pass, and bandpass filters on front and rear channels
((View More))
Alpine R2-A75M
R2-Series mono subwoofer amplifier — 750 watts RMS x 1 at 2 ohms
Product highlights:
- mono subwoofer amplifier
- 500 watts RMS x 1 at 4 ohms
- 750 watts RMS x 1 at 2 ohms
- variable low-pass filter (50-400 Hz, 24 dB/octave)
- variable bass boost (0-12 dB at 50 Hz)
- variable subsonic filter (8-40 Hz, 24 dB/octave)
- optional RUX-KNOB.2 wired remote level control
- preamp and speaker-level inputs
- speaker wire to RCA adapter required for speaker-level input
- preamp outputs
- wiring and hardware not included with amplifier
- 4-gauge power and ground leads recommended
- fuse rating: 40A x 2
- dimensions: 11.12″W x 2.23″H x 6.91″D
((View More))
Alpine S2-A55V
5-Channel Class D Amplifier 540 Watts RMS
Product highlights:
• 40 watts x 4 channel + 200 watts x 1 channel @ 4 ohms
• 60 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 120 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 540 watts
• Class D 2 ohms Stable 5-Channel-Channel Amplifier
((View More))
Kicker 46CXA660.5T
CX Series 5-channel car amplifier — 65 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms
Product highlights:
- 5-channel car amplifier
- 65 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
- 90 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
- 180 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- CTA-2006 compliant
- front and rear channels:
- Class AB amp technology
- frequency response: 20-20,000 Hz
- variable high-pass filter (10-200 Hz, 12 dB/octave)
- subwoofer channel:
- Class D amp technology
- frequency response: 25-200 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- fixed subsonic filter (25 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
((View More))
JBL Club A5055
5-Channel Class A/B Amplifier 800 Watts RMS
Product highlights:
- Premium JBL Sound with 50W X 4 and 500W X 1
- Compact size
- Low noise and distortion
- Variable crossover and bass boost
- Wired Remote Bass Control
((View More))
Kicker 46CXA1800.1T
CX Series mono subwoofer amplifier — 1,800 watts RMS x 1 at 2 ohms
Product highlights:
- mono subwoofer amplifier
- 900 watts RMS x 1 at 4 ohms
- 1800 watts RMS x 1 at 2 ohms
- 1800 watts RMS +/-10% x 1 at 1 ohm
- CTA-2006 compliant
- Class D amp technology
- frequency response: 25-200 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- fixed subsonic filter (25 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
((View More))
JL Audio XDM400/4
XDM Series Class-D 4-Channel Car/Marine Amplifier 400 Watts RMS
Product highlights:
• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier
((View More))
JL Audio RD1000/1
RD Series Class-D Monoblock Car Amplifier 1000 Watts RMS
Product highlights:
• 600 watts x 1 channel @ 4 ohms
• 800 watts x 1 channel @ 3 ohms
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
JL Audio XDM600/1
XDM Series, Class-D Mono Subwoofer Car/Marine Amplifier 600W RMS
Product highlights:
• 400 watts x 1 channel @ 4 ohms
• 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable Monoblock Amplifier
((View More))
JL Audio RD900/5
RD Series Class-D Monoblock Car Amplifier 500 Watts RMS
Product highlights:
- 5-channel car amplifier
- 70 watts RMS x 4 + 225 watts RMS x 1 at 4 ohms
- 100 watts RMS x 4 + 500 watts RMS at 2 ohms
- 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) + 500 watts RMS at 2 ohms
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs help eliminate noise
- variable high-pass filters (50-500 Hz, 12 dB/octave) on front and rear channels
- variable low-pass filter (50-500 Hz, 12 dB/octave) on subwoofer channel
- LED clip lights help set gain
((View More))
JL Audio XD800/8v2
XD Series 8-channel car amplifier — 75 watts RMS x 8
Product highlights:
- 8-channel car amplifier
- 75 watts RMS x 8 at 4 ohms (100 watts RMS x 8 at 2 ohms)
- 200 watts RMS x 4 bridged at 4 ohms (4-ohm stable bridged)
- variable low- and high-pass filters (50-500 Hz, 12 dB/octave)
- optional wired remote for level control (ch 5-8, ch 7-8, or all channels)
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs eliminate noise coming from your vehicle’s electrical system
- speaker- and preamp-level inputs (speaker-level input requires an optional adapter)
- 2-channel, 4-channel, and 8-channel input modes
- auto turn-on via DC offset or signal sensing
- Advanced Rollback Protection System prevents thermal shut-down
- 4-gauge power and ground leads and an 80-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 14-3/4″W x 2″H x 7-1/8″D
((View More))
JL Audio XDM1000/1
XDM Series Mono car/marine subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms
Product highlights:
- mono car/marine subwoofer amplifier
- 600 watts RMS x 1 at 4 ohms
- 1000 watts RMS x 1 at 2 ohms
- variable low-pass filter (50-500 Hz, 12 or 24 dB/octave)
- switchable subsonic filter (30 Hz, 24 dB/oct)
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs help eliminate noise
- weather-resistant chassis: black powder-coat finish, gasketed control cover, stainless steel hardware
- optional wired remote level control available
- preamp and speaker-level inputs
- switchable input filter (car/boat) eliminates interference from onboard high-current devices
- speaker-level inputs handle up to 4Vrms (about 4 watts)
- speaker-level inputs require Wire-to-RCA adapters
- speaker-level inputs feature auto turn-on via DC offset or signal sensing
- preamp outputs
- wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and an 80-amp fuse recommended
- 14-3/4″W x 2″H x 7-1/8″D
((View More))
JL Audio RD1500/1
RD Series Class-D Monoblock Car Amplifier 1500 Watts RMS
Product highlights:
• 750 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 3 ohms
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohms Stable Monoblock Amplifier
((View More))
Alpine HDA-M80
Status Series mono subwoofer amplifier — 800 watts RMS at 2 ohms
Product highlights:
- mono subwoofer amplifier
- 500 watts RMS x 1 at 4 ohms
- 800 watts RMS x 1 at 2 ohms
- Class-D amplifier technology
- frequency response: (-3 dB) 8 to 400 Hz
- variable low-pass filter (50-400 Hz, 24 dB/octave)
- variable subsonic filter (8-40 Hz, 24 dB/octave)
- variable bass boost (0-12 dB, 50 Hz)
((View More))
JL Audio XDM700/5
XDM Series 5-channel car/marine amplifier — 75 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms
Product highlights:
- 5-channel car/marine amplifier
- 75 watts RMS x 4 + 180 watts RMS x 1 at 4 ohms
- 100 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
- 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- Ch 1 & 2: variable high-pass filter (50-500 Hz, 12 dB/octave)
- Ch 3 & 4: variable high-pass or bandpass filter (50-500 Hz, 12 dB/octave)
- sub channel: low-pass filter (50-500 Hz, 12 or 24 dB/octave)
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs help eliminate noise
- weather-resistant chassis: black powder-coat finish, gasketed control cover, stainless steel hardware
((View More))
JL Audio XDM1000/5
XDM Series Class-D 5-Channel Car/Marine Amplifier 1000 Watts RMS
Product highlights:
• 75 watts x 4 channel + 400 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 600 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable 5-Channel Amplifier
((View More))
JL Audio XD1000/5v2
XD Series 5-channel car amplifier — 75 watts x 4 at 4 ohms + 600 watts RMS x 1 at 2 ohms
Product highlights:
- 5-channel car amplifer
- 75 watts RMS x 4 + 400 watts RMS x 1 (at 4 ohms)
- 100 watts RMS x 4 + 600 watts RMS x 1 (at 2 ohms)
- 200 watts RMS x 2 bridged at 4 ohms + 600 watts RMS x 1 at 2 ohms
- variable high-pass filter (50-5000 Hz, 12 dB/octave) on ch 1 & 2
- variable high-pass or bandpass filter (50-500 Hz, 12 dB/octave) on ch 3 & 4
- variable low-pass filter (50-500 Hz, 12 or 24 dB/octave) on sub ch
- optional wired remote for level control (sub channel only or all channels)
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs eliminate noise coming from your vehicle’s electrical system
- speaker- and preamp-level inputs (speaker-level input requires an optional adapter)
- auto turn-on via DC offset or signal sensing
- Advanced Rollback Protection System prevents thermal shut-down
- 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 14-3/4″W x 2″H x 7-1/8″D
